- V.44 and V.92 new features. Quick connect, PCM upstream and Modem On Hold.
- Host Signal Processing for both controller and datapump. Low cost design, Low
power consumption, less real estate.
- Robust hardware component supports software-only upgrades. Users stay current
with the least communications technology.
- ITU-T V.92/V.90 Data Mode with auto fallback to V.34. High-speed 56Kbps data
transfer with maximum degree of interoperability.
- Designed for Windows 98, 2000, Windows NT 4.0, Me and XP. PC2001 Logo
compliant.
- Group III, Class 1 Fax. Fax transfers up to 14.4kbps, with T.31 protocol.
- Video Phone Ready. Interface to H.324 video conferencing.
- Answering Machine. Use the PC as a telephone attendant and allows for remote message retrieval.
- ACPI Power Management with PME pin and 3.3V aux. supply. Reduced power
consumption and wake PC from D3 Cold state.
|
|
| Data Modem |
| Protocol |
V.92, V.90, V.34 ,V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A, Bell 103 |
| Error Correction |
V.42, LAP-M & MNP 2-4 |
| Data Compression |
V.44, V.42bis & MNP5 |
|
|
| FAX Modem |
| Protocol |
- Group III send and receive
- ITU-T V.34 fax
- V.17, V.29, V.27ter, V.21 ch 2
- EIA/TIA 578 Class1 and T.31 Class 1.0 Commands
|
| Voice, Telephony |
- TIA-695 command set
- 8-bit ì-Law/A-Law/linear coding
- 8000 Hz sample rate
- TAM support with concurrent DTMF detect, ring detect and Caller ID
|
| Video Phone Ready Modem |
- V.80 sync access mode supports host-controlled communication
protocol
- H.324 interface support
- V.8/V.8bis and AT commands (V.25 ter with Annex A)
|
| Other Telephony Features |
- Data/Fax/Voice call discrimination
- Single profile stored in host
- Modem and audio paths concurrent across PCI slot
- DTMF
|
| System Requirements |
| CPU |
Pentium 200Mhz and above, or compatible CPU |
| Memory |
32Mbytes or above |
| HDD space |
2Mbytes or above |
|
|
| Operating System Support |
- Windows 95/98/ME
- Windows NT 4.0
- Windows 2000
- Windows XP
|
| Interface |
| PC |
PCI Specification 2.2 |
| PSTN |
RJ11 |
|
|
| Power |
| Power input |
3.3VDC, 5VDC |
| Power Consumption |
- Sleep mode: 25mW (Typ.)
- Idle Mode: 220mW (Typ.)
- Operating Mode: 300mW (Typ.)
|
| Power Management |
- ACPI Power Manager Registers
- PME# pin and APM support
|
|
|
| Regulation |
| EMC Emission |
FCC part 15, class B |
| Telecom |
FCC part 68 |
|
|
| Mechanical |
| Size |
133mm(W) x 21mm (D) x 124mm (H) |
| Net Weight |
70 g (app.) |
|
|
| Environmental |
| Operating temperature |
0°C ~ 40°C |
| Humidity |
10 % ~ 90 % (non-condensing) |
| Storage temperature |
-20°C ~ 60°C |
|
|
