Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Gigabit Media Converter SC/SM 15Km, MC210CS

SKU #1025-SF-18
The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa.
- +

In stock

Ships Today If Ordered By 1pm PST

Purchasing this item will earn you 2 reward points (Reward point(s) $0.06) ! Applies only to registered customers, may vary when logged in.

**Not Eligible for free shipping.


TP-Link Product Page: MC210CS

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. 

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK!|s 19!| system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers.

  • Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
  • Supports auto MID/MID-X for TX port‚ 
  • Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely‚ 
  • Provides switch configuration of Force /Auto transfer mode for FX port. 
  • Extends fiber distance up to 15km‚ 
  • Easy-to-view LED indicators provide status to monitor network activity easily
  • External power supply (power adapter included)
Standards and Protocols
‚ IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Basic Function
‚ Full Duplex Flow Control (IEEE 802.3x)
‚ Extends fiber distance up to 15km
Link‚ Fault‚ Passthrough‚ and‚ Far‚ End‚ Fault‚ minimize‚ the‚ loss
caused‚ by‚ link‚ failure‚ timely‚ 
‚ 1 1000M SC port
‚ 1 1000M RJ45 port (Auto MDI/MDIX)
Network Media
‚ UTP Cat.5E cable (maximum 100m)
‚ EIA/TIA-568 100 ohm STP (maximum 100m)
‚ Single-mode Fiber
LED Indicators
Safety & Emission
Dimensions (W*D*H)
‚ 3.7 x 2.9 x 1.1 in. (94.5 x 73.0 x 27.0 mm)
‚ Operating Temperature: 0C~40C (32F~104F)
 Storage Temperature: -40C~70C (-40F~158F)
 Operating Humidity: 10%~90% non-condensing‚ 
 Storage Humidity: 5%~90% non-condensing
Power Supply
‚ External Power Adapter

Technical Drawings

No specification info found


1 Year